2.7MM Proximal Radius Neck LCP
+ Description
The radial head neck plate 2.4MM is intended for the treatment of the extra-articular and intra-articular fractures of the proximal radius and multi-fragmented radial neck fractures.
+ Indications
- 2.4/2.7MM Locking Plate Proximal Radius (Locking Neck Plate For Radial Head) indicated for Extra-articular and intra-articular fractures of the proximal radius and multifragmented radial neck fractures.
+ Specification
- Plates are precontoured for anatomical fit.
- Combi holes allow fixation with locking screws in the threaded section for angular stability, and cortex screws in the Dynamic Compression Unit (DCU) section for distraction. A fixed-angle construct provides advantages in osteopenic bone or multifragment fractures, where traditional
- The holes in the head of the plate accept 2.4MM locking screws and 2MM cortex screws.
- The shaft holes accept 2.4MM locking screws in the threaded portion or 2.7MM cortex screws and 2.4MM cortex screws in the distraction portion. Rounded edges minimize potential for tendon adhesion.
- Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
- Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
- locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
Product Ordering
| HOLES | SS | TI |
|---|---|---|
| 2 | 1029SS02 | 1029TI02 |
| 3 | 1029SS03 | 1029TI03 |
| 4 | 1029SS04 | 1029TI04 |
For More
- Explore our full range of trauma implants for optimal surgical outcomes
- Explore our full range of trauma implants for optimal surgical outcomes.
- Learn more about clavicle fractures and their treatment from the American Academy of Orthopaedic Surgeons
