7.3MM CANNULATED CANCELLOUS SCREW - FULL THREAD
+ Description
The Ø7.3mm Cannulated Cancellous Screw – Full Thread is engineered for scenarios demanding robust fixation in spongy (cancellous) bone, where traditional screws may lack the mechanical grip or structural integrity required. Unlike smaller-diameter screws, its 7.3mm profile bridges the gap between standard cancellous screws and heavier cortical implants, offering a hybrid solution for challenging anatomical sites.
+ Indications
- This screw is a surgeon’s tactical tool—not just hardware—for balancing biological preservation with biomechanical demands in complex cancellous environments.
- Complex Fracture Fixation: Provides robust stabilization for fractures in cancellous (spongy) bone, especially in large, load-bearing areas such as the pelvis, femur, or tibia.
- Bone Reconstruction: Used in procedures requiring the alignment and fixation of bone fragments or supporting bone grafts for structural integrity.
- Arthrodesis: Assists in joint fusion surgeries by securely anchoring bones, ensuring proper positioning and stability.
- Trauma Management: Essential in the repair of bone injuries caused by high-impact trauma, offering precision and strength.
- Nonunion and Malunion Repair: Effective in addressing cases of improper or incomplete healing of fractures, ensuring consistent and long-lasting fixation.
- Revision Surgeries: Useful in orthopedic revision procedures, where it provides enhanced support and stabilization to improve surgical outcomes.
- Its full-thread design ensures uniform engagement with bone, while the cannulated structure allows for accurate, minimally invasive placement using a guide wire, ultimately enhancing surgical precision and patient recovery.
+ Key Features
- Standout Features Optimized Thread Geometry:- A proprietary asymmetric thread pattern enhances bone purchase without over-stressing fragile cancellous structures, reducing the risk of microfractures during insertion.
- Torque-Resistant Core:- The screw’s reinforced central shaft prevents deformation under high torsional forces, critical for dense or sclerotic bone encountered in revision surgeries or osteoporotic cases.
- Low-Profile Cannulation:- The hollow core is precision-machined to accommodate 0.8–1.2mm K-wires, enabling single-pass guidance in percutaneous procedures while maintaining wall thickness for durability.
- Surface Treatment:- Electropolished or hydroxyapatite-coated variants reduce soft-tissue irritation and promote osseointegration in non-load-sharing applications (e.g., metaphyseal fractures).
- Heat-Treated Alloys:- Forged from grade 5 titanium or cold-worked stainless steel, the screw balances fatigue resistance with MRI compatibility, ideal for post-op imaging.
Product Ordering
| mm | SS | TI |
|---|---|---|
| 10 | 3032SS10 | 3032TI10 |
| 12 | 3032SS12 | 3032TI12 |
| 14 | 3032SS14 | 3032TI14 |
| 16 | 3032SS16 | 3032TI16 |
| 18 | 3032SS18 | 3032TI18 |
| 20 | 3032SS20 | 3032TI20 |
| 22 | 3032SS22 | 3032TI22 |
| 24 | 3032SS24 | 3032TI24 |
| 26 | 3032SS26 | 3032TI26 |
| 28 | 3032SS28 | 3032TI28 |
| 30 | 3032SS30 | 3032TI30 |
| 32 | 3032SS32 | 3032TI32 |
| 34 | 3032SS34 | 3032TI34 |
| 36 | 3032SS36 | 3032TI36 |
| 38 | 3032SS38 | 3032TI38 |
| 40 | 3032SS40 | 3032TI40 |
For More
- Explore our full range of trauma implants for optimal surgical outcomes
- Explore our full range of trauma implants for optimal surgical outcomes.
- Learn more about clavicle fractures and their treatment from the American Academy of Orthopaedic Surgeons
